 Click to enlarge |
Specifications
|
||||||||||||
| Please ensure the product(s) that you are going to buy fits the brand, model and part number of your device. | |||||||||||||
This SONY NP-33 can replce the following OEM Part No:
|
|||||||||||||
This SONY NP-33 is also compatible with following machine models: |
|||||||||||||
 Warranty Policy We warrant that the products sold in our website are 100% brand new and free from defects in material and workmanship - We never sell used or refurbished SONY Digital Camera Battery .
|
|||||||||||||
Related products :
Suitable for Battery Charger for HITACHI VM-BP83, VM-BP84price: AU $21.21 |
|||||||||||||
SONY Digital Camera Battery Articles & TipsA new SONY digital camera battery comes in a discharged condition and must be charged before use (refer to the devices manual for charging instructions). Upon initial use (or after a prolonged storage period) the digital camcorder SONY NP-33 may require three to four charge/discharge cycles before achieving maximum capacity. New SONY NP-33 needs to be fully charged and discharged (cycled) a few times before it can condition to full capacity. Rechargeable batteries undergo self-discharging when left unused. Always store a Digital Camera Battery pack in a fully charged staged for storage.When charging the SONY NP-33 for the first time the device may indicate that charging is complete after just 10 or 15 minutes. This is a normal phenomenon with rechargeable batteries. Remove the camcorder batteries from the device, reinsert it and repeat the charging procedure It is important to condition (fully discharge and then fully charge) the SONY NP-33 every two to three weeks. Failure to do so may significantly shorten the battery's life (this does not apply to Li-ion batteries, which do not require conditioning). To discharge, simply run the device under the battery's power until it shuts down or until you get a low battery warning. Then recharge the battery as instructed in the user's manual. If the battery will not be in use for a month or longer, it is recommended that SONY NP-33 be removed from the device and stored in a cool, dry, clean place. Invest in a good charger for your camcorder. Ni-MH batteries should not be charged in a NiCad charger, unless the charger is specifically made for both chemistries. There are cheap chargers and there are expensive chargers. Make sure the charger you get has good reviews and is well made. Chargers with micro-controller chips are usually the best choice of your digital camcorder. Be sure to store your Digital Camera Battery properly. Do not leave your batteries in a hot car, or in humid conditions. The best storage conditions are a cool, dry place. The refrigerator is fine if you stick in a packet of silica gel with your SONY NP-33 in a sealed bag to keep them dry. It is a good idea to charge your NiCad or Ni-MH batteries fully before use if they have been in storage. Upgrade my SONY Digital Camera Battery From Ni-MH to Li-ionNiCad, Ni-MH and Li-ion SONY Digital Camera Battery is all fundamentally different from one another and cannot be substituted unless the Digital Camera has been pre-configured from the manufacturer to accept more than one type of battery chemistry. Please refer to your manual to find out which rechargeable battery types the laptop device supports or use our SONY Battery Finder above to find all the compatible Digital Camera Battery for your device. It will automatically list all of the battery chemistries supported by your specific device. If your device does allow you to upgrade the battery from Ni-MH to Li-ion, you will typically get longer run time. For example, if your Digital Camera uses a NI-MH battery that is 9.6 Volts, 4000mAh and the new Li-ion Digital Camera Battery is 14.4 Volt, 3600mAh, then you will obtain longer run time with the Li-ion battery. Example: Li-ion: 14.4 Volts x 3.6 Amperes = 51.84 Watt Hours How Can I Maximize the performance of My SONY Digital Camera Battery?There are several steps you can take to help you get maximum performance from your Digital Camera Battery: Prevent the Memory Effect - Keep the Digital Camera Battery healthy by fully charging and then fully discharging it at least once every two to three weeks. Exceptions to the rule are Li-ion batteries which do not suffer from the memory effect. Keep the SONY Digital Camera Battery Clean - It's a good idea to clean dirty battery contacts with a cotton swab and alcohol. This helps maintain a good connection between the battery and the portable device. Exercise the Battery - Do not leave the battery dormant for long periods of time. We recommend using the battery at least once every two to three weeks. If an Digital Camera Battery has not been used for a long period of time, perform the new battery break in procedure described above. Battery Storage - If you don't plan on using the Digital Camera Battery for a month or more, store it in a clean, dry, cool place away from heat and metal objects. NiCad, Ni-MH and Li-ion batteries will self-discharge during storage; remember to recharge the batteries before use. What is The Run Time of Battery-Company.com.au's Digital Camera Battery?SONY Digital Camera Battery have two main ratings on them: Volts and Amperes. Because size and weight of Digital Camera Battery is limited when compared to larger batteries such as car batteries, most companies show their ratings with Volts and Mill amperes. One thousand Mill amperes equals 1 Ampere. When buying a battery, select batteries with the most Mill amperes (or mAh). Batteries are also rated by Watt-Hours, perhaps the simplest rating of all. This is found by multiplying the Volts and the Amperes together. For example: 14.4 Volts, 4000mAh (Note: 4000mAh is equal to 4.0 Amperes). 14.4 x 4.0 = 57.60 Watt-Hours Watt-Hours signify the energy needed to power one watt for one hour. This SONY Digital Camera Battery can power 57.60 watts for one hour. If your laptop runs at 20.50 watts, as an example, this laptop battery could power your laptop for 2.8 hours. Understanding Your SONY Battery NeedsWe strive to make you Digital Camera Battery purchases easy. Since we understand that finding the right batteries for your needs can be overwhelming and confusing at times we developed an Digital Camera Battery finder tool to help find the right size for the make and model of your equipment. We also offer educational articles and tips to help you conserve your batteries and understand common problems. By us providing education you are able to make the right purchasing decisions as well as provide proper care for all of your electronics. |
|||||||||||||
DisclaimerThe batteries supplied by our Company are [replacement for] sold for use with certain products of computer manufacturers, and any reference to products or trademarks of such companies is purely for the purpose of identifying the computer manufacturers with which our products [are replacement for] may be used. Our Company and this Website are neither affiliated with, authorized by, licensed by, distributors for, nor related in any way to these computer manufacturers, nor are the products offered for sale through our Website manufactured by or sold with the authorization of the manufacturers of the computers with which our products [are replacement for] may be used. | |||||||||||||
Battery Company | What's New | About Us |
Link Directory |
Help Center |
Term & Conditions |
Privacy Policy |
Accessibility Statement |
|
Site Map(html)(xml)(xml2)
© Battery-Company.com.au. All rights reserved. The logo is trademark of Battery-Company.com.au, which affiliates in the Australia where are applicable. All other trademarks mentioned in this web site & Logos displayed are the property of their respective owners.